The following guides you have chosen are displayed below:

ZyXEL P-870HN-51b Wireless Setup Guide For VDSL2

This guide will walk you through setting up a wireless network the ZyXEL P-870HN-51b modem for use with the VDSL2 service.

Step 1
Plug the power adapter to turn on the ZyXEL P-870HN-51b.
Step 2
Allow 60 - 90 seconds for the ZyXEL P-870HN-51b to power up.
Step 3
Connect your computer to any Ethernet port on the ZyXEL P-870HN-51b.
Step 4
Connect your modem to the phone VDSL enabled phone socket.
Before progressing to the next step ensure that the modem has a solid DSL light.
Step 5
Open the web browser (Internet Explorer, Firefox, Google Chrome, Safari etc) on the computer, type in http://192.168.1.1/ in the address bar and then press Enter. ZyXEL P-870HN-51b 6
Step 6
Log into the modem by entering the Username admin and the Password 1234.

The press the Login button.

ZyXEL P-870HN-51b 7
Step 7
On the left menu select Network. ZyXEL P-870HN-51b 8
Step 8
Then, on the left menu select Wireless LAN. ZyXEL P-870HN-51b 9
Step 9
Ensure that Enable Wireless LAN is ticked.

Ensure that Channel Selection is set to 20MHz.

Set Network Name (SSID) to whatever you want your wireless network to be called.

Ensure that Auto Generate Key, Hide Network Name and Enable Wireless Multicast Forwarding (WMF) are not ticked.

Ensure that Security Mode is set to WPA2-PSK.

Ensure that Encryption is set to AES.

Set Pre-Shared Key to whatever you want your wireless network password to be.

Set Group Key Update Timer to 1800 sec.

Press the Apply button.

After a few moments the wireless network will be ready to connect too.
ZyXEL P-870HN-51b 10
Further Help: If you require further assistance, please contact the Adam Internet Help Desk on (08) 8423 4000 or email help@adam.com.au with as much detail as possible regarding the issue at hand.