The following guides you have chosen are displayed below:

Netcomm NB6plus4W Rev1 Firmware Upgrade Guide For ADSL & ADSL2+

This guide will walk you through upgrading the firmware on the Netcomm NB6plus4W Rev1 modem for use with the ADSL & ADSL2+ service.

Please ensure that you have downloaded and have loaded on your computer the latest version of the Netcomm NB6plus4W Rev1 firmware.

To download the latest version of the firmware please click here.

Step 1
Plug the power adapter to turn on the Netcomm NB6plus4W Rev1.
Step 2
Allow 60 - 90 seconds for the Netcomm NB6plus4W Rev1 to power up.
Step 3
Connect your computer to an Ethernet port on the Netcomm NB6plus4W Rev1.
Step 4
Open the web browser (Internet Explorer, Firefox, Google Chrome, Safari etc) on the computer, type in http://192.168.1.1/ in the address bar and then press Enter. Netcomm NB6plus4W Rev1 5
Step 5
Log into the modem by entering the Username admin and the Password admin.

The press the Login button.

Netcomm NB6plus4W Rev1 6
Step 6
From the top menu select Management. Netcomm NB6plus4W Rev1 7
Step 7
From the left menu select Update Firmware. Netcomm NB6plus4W Rev1 8
Step 8
Press the Browse or Choose File button.

Navigate to and select the firmware of the modem from your computer.

Press the Update Firmware button.
Netcomm NB6plus4W Rev1 9
Step 9
You will now be presented with a message notifying you that the update is in progress.

The firmware upgrade is complete once the modem has fully rebooted. This may take up to three minutes.
Further Help: If you require further assistance, please contact the Adam Internet Help Desk on (08) 8423 4000 or email help@adam.com.au with as much detail as possible regarding the issue at hand.