The following guides you have chosen are displayed below:
Cisco SRP 521W Wireless Setup Guide For Business WiMAX
This guide will walk you through configuring the Cisco SRP 521W router for use with the Business WiMAX service.
|Plug the power adapter to turn on the Cisco SRP 521W.|
|Allow 60 - 90 seconds for the Cisco SRP 521W to power up.|
|Connect your computer to any Ethernet port on the Cisco SRP 521W.|
Connect your routers WAN port to the ethernet port of the PoE.
Before progressing to the next step ensure that the routers WAN light is illuminated.
|Open the web browser (Internet Explorer, Firefox, Google Chrome, Safari etc) on the computer, type in http://192.168.15.1/ in the address bar and then press Enter.|
Log into the router by entering the Username admin and the Password admin.
Then press the Log In button.
|On the left menu select WAN Setup.|
Set Network Mode to Mixed.
Set Radio Band to Standard - 20MHz Channel.
Set Standard Channel to Auto.
Set SSID1 - Wireless Network Name (SSID) to what you want your wireless network to be called.
Ensure that SSID1 - Broadcast Network Name and SSID1 - Enabled Network are ticked.
Ensure that all field and tick boxes are empty / not ticked for the SSID2, SSID3, SSID4 rows.
Then press the SSID1 Edit button.
|A message will be will be displayed while the modem applies the previous details.|
Ensure that the network name that you entered earlier is selected from the Select a SSID dropdown options.
Ensure that Security Mode is set to WPA Personal.
Ensure that WPA Algorithms is set to TKIP + AES.
Enter in what you would like your network password to be into the WPA Shared Key field.
Set Group Key Renewal to 3600 seconds.
|A message will be will be displayed once the wireless details have been applied.|
Further Help: If you require further assistance, please contact the Adam Internet Help Desk on (08) 8423 4000 or email firstname.lastname@example.org with as much detail as possible regarding the issue at hand.