The following guides you have chosen are displayed below:

Cisco SRP 521W Authentication Setup Guide For Business WiMAX

This guide will walk you through configuring the Cisco SRP 521W router for use with the Business WiMAX service.

Step 1
Plug the power adapter to turn on the Cisco SRP 521W.
Step 2
Allow 60 - 90 seconds for the Cisco SRP 521W to power up.
Step 3
Connect your computer to any Ethernet port on the Cisco SRP 521W.
Step 4
Connect your routers WAN port to the ethernet port of the PoE.
Before progressing to the next step ensure that the routers WAN light is illuminated.
Step 5
Open the web browser (Internet Explorer, Firefox, Google Chrome, Safari etc) on the computer, type in in the address bar and then press Enter. Cisco SRP 521W 6
Step 6
Log into the router by entering the Username admin and the Password admin.

Then press the Log In button.

Cisco SRP 521W 7
Step 7
On the left menu select WAN Setup. Cisco SRP 521W 8
Step 8
Ensure that Connection Type is set to PPPoE.

Set User Name to your Adam Internet username.
Remember to include after your username.

Set Service Name to Adam.

Ensure that Keep Alive is selected.

Set Host Name to SRP521W.

The Domain Name field can be left blank.

Ensue that MTU is set to Auto.

Static DNS 1, Static DNS 2 and Static DNS 3 should all be set as

Then press the Submit button.

Cisco SRP 521W 9
Step 9
Two messages will then be displayed to confirm that the settings have been applied. Cisco SRP 521W 10
Cisco SRP 521W 10
Further Help: If you require further assistance, please contact the Adam Internet Help Desk on (08) 8423 4000 or email with as much detail as possible regarding the issue at hand.