The following guides you have chosen are displayed below:

Netcomm NB16WV AdamTV with Fetch Setup Guide

This guide will walk you through setting up the Netcomm NB16WV modem router for use with AdamTV with Fetch.

Let us configure your modem remotely!
If you purchased your Netcomm NB16WV modem from Adam Internet you are in luck. You now have the choice for us to configure your AdamTV with Fetch service for you with our Remote Management service. To find out more please click here.

Configuring the Modem

  1. Login again to the modem if needed, using username admin and the password admin, click Login.
  2. NB16WV login screen

  3. On the Status page, click Switch to advanced view.
  4. On the top menu, click Network Setup > Network Setup.
  5. Next to WAN Interface, click the PVC0 dropdown menu and select PVC1.
  6. Enter the following settings and then click Save:

    1. WAN Interface: ADSL PVC1 Active
    2. WAN Type: Ethernet over ATM (RFC 1483 Bridged) with NAT
    3. IP Mode: Dynamic IP Address
    4. NAT: Untick Enabled
    5. Data Encapsulation: LLC
    6. VPI Number: 9
    7. VCI Number: 89
    8. Schedule Type: UBR
    9. Multicast: Auto
    10. IGMP Snooping: Enable

Further Help: If you require further assistance, please contact the Adam Internet Help Desk on (08) 8423 4000 or email help@adam.com.au with as much detail as possible regarding the issue at hand.