The following guides you have chosen are displayed below:

Netcomm NB9WMAXX AdamTV with Fetch Setup Guide

This guide will walk you through setting up the Netcomm NB9WMAXX modem router for use with AdamTV with Fetch.

Configuring the Modem

Step 1
Plug the power adapter to turn On the NB9WMAXX.
Step 2
Allow 60 - 90 seconds for the NB9WMAXX to power up.
Step 3
Connect your computer to any Ethernet port on the NB9WMAXX.
Step 4
Open the web browser (Internet Explorer, Firefox, Google Chrome, Safari etc) on the computer, type in http://192.168.1.1/ in the address bar and then press Enter. nb9wmaxx_fetchtv_1
Step 5
Log into the modem by entering the Username 'admin' and the Password 'admin'.

The press the 'Login' button.
nb9wmaxx_fetchtv_2
Step 6
Select Advanced from the left hand menu. nb9wmaxx_fetchtv_3
Step 7
Select WAN from the left hand menu.

Then, click Add below the table on the right hand side.
nb9wmaxx_fetchtv_4
nb9wmaxx_fetchtv_4a
Step 8
Now set:
VPI: [0-255] to 9
VCI: [32-65535] to 89
Service Category to UBR Without PCR Ensure that Enable Quality Of Service is ticked

Finally, click Next
nb9wmaxx_fetchtv_5
Step 9
Set the Connection Type to Static IP Address (MER) and set the Encapsulation Mode to LLC/SNAP-BRIDGING.

When done, click Next.
nb9wmaxx_fetchtv_6
Step 10
Select Obtain an IP address automatically

Select Use the following default gateway

Untick Use IP Address
Tick Use WAN Interface and select pppoe_0_8_35/ppp_0_8_35_1

Select Obtain DNS server addresses automatically

Then click Next
nb9wmaxx_fetchtv_7
Step 11
Leave Enable NAT and Enable Firewall unticked.

Set Enable IGMP Multicast and Enable WAN Service as ticked.

Enter fetchtv into the Service Name field.

Then click Next and Save.
nb9wmaxx_fetchtv_8
nb9wmaxx_fetchtv_8
Step 12
Select Port Mapping from the left hand menu nb9wmaxx_fetchtv_11
Step 13
Ensure that Enable virtual ports on is selected and the field next to it contain ENET(1-4).

nb9wmaxx_fetchtv_12
Select LAN from the left hand menu. nb9wmaxx_fetchtv_9
Step 14
Ensure that Enable IGMP Snooping is ticked.

Select Blocking Mode.

All other settings are correct by default.

Then click Save/Reboot.

Once your Netcomm NB9WMAXX has rebooted it will now be configured for AdamTV with Fetch.
nb9wmaxx_fetchtv_10
Further Help: If you require further assistance, please contact the Adam Internet Help Desk on (08) 8423 4000 or email help@adam.com.au with as much detail as possible regarding the issue at hand.