The following guides you have chosen are displayed below:

Netcomm NB6plus4W Rev 2 Login Setup Guide

This guide will walk you through setting up the Netcomm NB6plus4W Rev 2 modem to get access to the Internet.
Step 1
Plug the power adapter to turn on the Netcomm NB6plus4W Rev 2.
Step 2
Allow 60 - 90 seconds for the Netcomm NB6plus4W Rev 2 to power up.

Ensure that you have static ADSL light on your modem before progressing any further.
Step 3
Connect your computer to any Ethernet port on the Netcomm NB6plus4W Rev 2.
Step 4
Open the web browser (Internet Explorer, Firefox, Google Chrome, Safari etc) on the computer, type in http://192.168.1.1/ in the address bar and then press Enter. nb6plus4w_rev2_firmware_1
Step 5
Log into the modem by entering the Username 'admin' and the Password 'admin'.

The press the 'Login' button.
nb6plus4w_rev2_firmware_2
Step 6
If you don't see the table to the right of this text, select Quick Setup from the top menu.

Enter in your Adam Internet username into the Broadband User Name field.
Remember to include '@adam.com.au' after your username.

Enter in your Adam Internet password into the Password field.

Press the Connect button.
nb6plus4w_rev2_firmware_3
Step 7
You will then be presented with a message letting you know that the connection is in progress.

After about 20-30 seconds you will be online and able to surf the web.
nb6plus4w_rev2_firmware_4
Step 8
You will now receive a message advising that you have successfully setup your modem.

Click the Next button and you will now be able to browse the internet.
nb6plus4w_rev2_firmware_5
Further Help: If you require further assistance, please contact the Adam Internet Help Desk on (08) 8423 4000 or email help@adam.com.au with as much detail as possible regarding the issue at hand.