The following guides you have chosen are displayed below:

Netcomm NB16WV Hardware Setup Guide For Naked DSL

This guide will walk you through setting up the Netcomm NB16WV modem for use with the Naked DSL service.

Step 1 - Turning On The Modem Netcomm NB16WV Hardware Setup
Plug the power adapter to both a power socket and the rear of the modem. The proceed to turn on the modem.

The Netcomm NB16WV has an on / off switch at its rear.
Step 2 - Powering Up The Modem
Allow 60 - 90 seconds for the Netcomm NB16WV to power up.
Step 3 - Connecting The Modem To The Phone Socket
Using the phone cable that is supplied with the Netcomm NB16WV connect the modem to the a telephone wall socket in the premises.

Ensure that you do not place a Line Filter between the modem and the telephone wall socket.

Should a Central Splitter be installed within the premises a single phone socket should be labelled Internet or ADSL, ensure that your modem is connect to one of these sockets.
Step 4 - Connecting To The Exchange
Once the phone cable is connected and modem powered on, the ADSL/DSL light on the modem will commence flashing. This indicates that the modem negotiating a connection with the ADSL/DSL equipment at your local telephone exchange. When this negotiation is successfully completed the ADSL/DSL light will remain permanently on.
Step 5 - Authentication
Our Netcomm NB16WV manual configuration guide for authentication is located here.
Step 6 - AdamTalk
To use the AdamTalk service you will need to ensure that you have a landline phone plugged into the Phone 1 port at the back of the modem and have the modem configured with your AdamTalk details.

AdamTalk manual configuration guide can be found here.
Step 7 - Fetchtv
Full fetchtv customers will need to setup there fetchtv set top box to connect to their TV and modem.

A detailed fetchtv setup guide can be found here.

As well as setting up your phone handset or fetchtv set top box you will also need to configure your modem to enable these services to function correctly.

Please note: No special modem configuration is required for the fetchtv lite package to function correctly.

Our manual fetchtv configuration guides are listed below:
Further Help: If you require further assistance, please contact the Adam Internet Help Desk on (08) 8423 4000 or email help@adam.com.au with as much detail as possible regarding the issue at hand.