The following guides you have chosen are displayed below:

Netcomm NB6Plus4W Rev 1 AdamTV with Fetch Setup Guide

This guide will walk you through setting up the Netcomm NB6Plus4W modem router for use with AdamTV with Fetch.

Configuring the Modem

Step 1
Plug the power adapter to turn On the NB6Plus4W.
Step 2
Allow 60 - 90 seconds for the NB6Plus4W to power up.
Step 3
Connect your computer to any Ethernet port on the NB6Plus4W.
Step 4
Open the web browser (Internet Explorer, Firefox, Google Chrome, Safari etc) on the computer, type in http://192.168.1.1/ in the address bar and then press Enter. NB6Plus4W Rev 1 fetchtv Setup Image
Step 5
Log into the modem by entering the Username 'admin' and the Password 'admin'.

The press the 'Login' button.
NB6Plus4W Rev 1 fetchtv Setup Image
Step 6/td>
Select Advanced from the top menu. NB6Plus4W Rev 1 fetchtv Setup Image
Step 7
Select Internet from the left hand menu.

Then, select Connections also from the left hand menu.

Finally, click the Add button.
NB6Plus4W Rev 1 fetchtv Setup Image
NB6Plus4W Rev 1 fetchtv Setup Image
Step 8
Now set:
VPI to 9
VCI to 89
Service Category to UBR Without PCR

Finally, click Next
NB6Plus4W Rev 1 fetchtv Setup Image
Step 9
Set the Protocol to Bridging and set the Encapsulation Type to LLC/SNAP.

Ensure that Enable QoS and Enable 802.1Q VLAN Tagging are not ticked.

Click Next.
NB6Plus4W Rev 1 fetchtv Setup Image
Step 10
Select Obtain an IP address automatically

Select Obtain DNS server addresses automatically

Ensure that Enable NAT and Add Default Route are not ticked.

Then click Next
NB6Plus4W Rev 1 fetchtv Setup Image
Step 11
Tick Enable this Internet Connection.

Enter fetchtv into the Connection Name field.

Then click Apply.
NB6Plus4W Rev 1 fetchtv Setup Image
Step 12
Select IGMP Proxy from the left menu. NB6Plus4W Rev 1 fetchtv Setup Image
Step 13
Ensure that IGMP Proxy Enabled is ticked for fetchtv.

Then click Apply.
NB6Plus4W Rev 1 fetchtv Setup Image
Step 14
Select Local Network from the left menu.

Then select IGMP Snooping from the left menu.
NB6Plus4W Rev 1 fetchtv Setup Image
NB6Plus4W Rev 1 fetchtv Setup Image
Step 15
Set IGMP Snooping to Enabled and ensure that Filtering out multicast packets which will be sent to your local network if no users play multimedia movies is ticked.

Then click Apply.
NB6Plus4W Rev 1 fetchtv Setup Image
Step 16
Now click the red text restarting router below the left menu.

Finally, click the Reboot button.

Upon completion of the reboot your Netcomm NB6Plus4W will be configured for AdamTV with Fetch.
NB6Plus4W Rev 1 fetchtv Setup Image
NB6Plus4W Rev 1 fetchtv Setup Image
Further Help: If you require further assistance, please contact the Adam Internet Help Desk on (08) 8423 4000 or email help@adam.com.au with as much detail as possible regarding the issue at hand.