The following guides you have chosen are displayed below:

Billion 7800VDOX Authentication Setup Guide For Business ADSL2+ & Business Naked DSL

This guide will walk you through configuring the Billion 7800VDOX modem for use with the Business ADSL2+ & Business Naked DSL service.

Step 1
Plug the power adapter to turn on the Billion 7800VDOX.
Step 2
Allow 60 - 90 seconds for the Billion 7800VDOX to power up.
Step 3
Connect your computer to any Ethernet port on the Billion 7800VDOX.
Step 4
Connect your modem to the phone ADSL enabled phone socket.
Before progressing to the next step ensure that the modem has a solid DSL light.
Step 5
Open the web browser (Internet Explorer, Firefox, Google Chrome, Safari etc) on the computer, type in in the address bar and then press Enter. Billion 7800VDOX 6
Step 6
Log into the modem by entering the Username admin and the Password admin.

The press the Login button.

Billion 7800VDOX 7
Step 7
On the left menu select Configuration. Billion 7800VDOX 8
Step 8
The from the left menu select WAN. Billion 7800VDOX 9
Step 9
Then click the Edit button for the ETH Interface (ppp0.1). Billion 7800VDOX 10
Step 10
Set Type to PPP over Ethernet (PPPoE).

Set VPI / VCI to 8 / 35.

Leave Description pppoe_0_8_35.

Set both 802.1P Priority and 802.1Q VLAN ID to -1.

Set Username to your Adam Internet username (eg Ensure that you include after your username.

Set Password to your Adam Internet account password.

Leave Service Name blank.

Set Authentication Method to AUTO.

Ensure that Firewall, NAT and IPv6 for this service are enabled.

Ensure that Fullcone NAT, IPv4 Address, Dial on demand, IPv6 Address, PPPoE with Pass-through, IGMP Multicast Proxy and MLD Multicast Proxy are not ticked. Set MTU to 1492.

Press the Apply button and your modem will momentarily connect to the internet.
Billion 7800VDOX 11
Further Help: If you require further assistance, please contact the Adam Internet Help Desk on (08) 8423 4000 or email with as much detail as possible regarding the issue at hand.