The following guides you have chosen are displayed below:

Billion 7402X Hardware Setup Guide For Business ADSL2+ & Business Naked DSL

This guide will walk you through setting up the Billion 7402X modem for use with the Business ADSL2+ & Business Naked DSL service.

Step 1 - Turning On The Modem Modem Setup
Plug the power adapter to both a power socket and the rear of the modem. The proceed to turn on the modem.

The Billion 7402X has an on / off switch at its rear.
Step 2 - Powering Up The Modem
Allow 60 - 90 seconds for the Billion 7402X to power up.
Step 3 - Connecting The Modem To The Phone Socket
Using the phone cable that is supplied with the Billion 7402X connect the modem to the a telephone wall socket in the premises.

Ensure that you do not place a Line Filter between the modem and the telephone wall socket.

Should a Central Splitter be installed within the premises a single phone socket should be labelled Internet or ADSL, ensure that your modem is connect to one of these sockets.
Step 4 - Connecting To The Exchange
Once the phone cable is connected and modem powered on, the ADSL/DSL light on the modem will commence flashing. This indicates that the modem negotiating a connection with the ADSL/DSL equipment at your local telephone exchange. When this negotiation is successfully completed the ADSL/DSL light will remain permanently on.
Step 5 - Authentication
Our Billion 7402X manual configuration guide for authentication is located here.
Further Help: If you require further assistance, please contact the Adam Internet Help Desk on (08) 8423 4000 or email help@adam.com.au with as much detail as possible regarding the issue at hand.