The following guides you have chosen are displayed below:
- Hardware Setup
Billion 7402NX Hardware Setup Guide For Business ADSL2+ & Business Naked DSL
This guide will walk you through setting up the Billion 7402NX modem for use with the Business ADSL2+ & Business Naked DSL service.
|Step 1 - Turning On The Modem|
Plug the power adapter to both a power socket and the rear of the modem. The proceed to turn on the modem.
The Billion 7402NX has an on / off switch at its rear.
|Step 2 - Powering Up The Modem|
|Allow 60 - 90 seconds for the Billion 7402NX to power up.|
|Step 3 - Connecting The Modem To The Phone Socket|
Using the phone cable that is supplied with the Billion 7402NX connect the modem to the a telephone wall socket in the premises.
Ensure that you do not place a Line Filter between the modem and the telephone wall socket.
Should a Central Splitter be installed within the premises a single phone socket should be labelled Internet or ADSL, ensure that your modem is connect to one of these sockets.
|Step 4 - Connecting To The Exchange|
|Once the phone cable is connected and modem powered on, the ADSL/DSL light on the modem will commence flashing. This indicates that the modem negotiating a connection with the ADSL/DSL equipment at your local telephone exchange. When this negotiation is successfully completed the ADSL/DSL light will remain permanently on.|
|Step 5 - Authentication|
|Our Billion 7402NX manual configuration guide for authentication is located here.|
Further Help: If you require further assistance, please contact the Adam Internet Help Desk on (08) 8423 4000 or email firstname.lastname@example.org with as much detail as possible regarding the issue at hand.