The following guides you have chosen are displayed below:
Netcomm NB16WV Wireless Setup Guide
This guide will walk you through setting up a wireless network with the Netcomm NB16WV modem router.
|Plug the power adapter to turn On the NB16WV.|
|Allow 60 - 90 seconds for the NB16WV to power up.|
|Connect your computer to any Ethernet port on the NB16WV.|
|Open the web browser (Internet Explorer, Firefox, Google Chrome, Safari etc) on the computer, type in http://192.168.1.1/ in the address bar and then press Enter.|
Log into the modem by entering the Username 'admin' and the Password 'admin'.
The press the 'Login' button.
If the 'First Time Setup Wizard' is displayed select 'No thanks, take me to the basic interface'.
Otherwise, click the 'Switch to advanced view' link at the bottom right of the Basic View to get into to get into the Advanced View mode.
|Hover over Network Setup in the top menu and then click Wireless.|
Set Wireless Module to Enable.
Enter in a name for your wireless network into the Network ID(SSID) field.
Set SSID Broadcast to Enable.
Set Channel to Auto.
Set Wireless Mode to B/G/N mixed.
Set Authentication to WPA-PSK / WPA2-PSK.
Set Encryption to TKIP / AES.
Enter in a password for your wireless network in the Pre-shared Key field.
Press the Save button.
You will now need to reboot the modem.
When you are ready to reboot the modem press the Reboot button.
Once the modem has rebooted you will be able to connect to the wireless network.
Further Help: If you require further assistance, please contact the Adam Internet Help Desk on (08) 8423 4000 or email firstname.lastname@example.org with as much detail as possible regarding the issue at hand.