The following guides you have chosen are displayed below:
Netcomm NB16WV AdamTalk Setup Guide
This guide will walk you through setting up a AdamTalk service with the Netcomm NB16WV modem / router.
Note: This guide assumes that the NB16WV currently have to access the internet. If this is not the case please follow our Authentication Guide.
|Plug the power adapter to turn On the NB16WV.|
|Allow 60 - 90 seconds for the NB16WV to power up.|
|Connect your computer to any Ethernet port on the NB16WV.|
|Open the web browser (Internet Explorer, Firefox, Google Chrome, Safari etc) on the computer, type in http://192.168.1.1/ in the address bar and then press Enter.|
Log into the modem by entering the Username 'admin' and the Password 'admin'.
The press the 'Login' button.
If the 'First Time Setup Wizard' is displayed select 'No thanks, take me to the basic interface'.
Otherwise, click the 'Switch to VoIP/NAS view' link at the bottom right of the Basic View to get into to get into the VoIP View mode.
|Hover over SIP Setting in the top menu and then click Service Domain.|
Set WAN Interface to PVC0.
Set Display Name, Username & Register Name to your VoIP phone number (e.g.08xxxxxxxx)
Set Register Password to your Adam VoIP password
Set Realm, Proxy Server, Registrar & Outbound Proxy to sip.sa.adam.com.au.
Set Domain to sip.adam.com.au
Set Use Outbound Server to Disable.
Press the Save button
Further Help: If you require further assistance, please contact the Adam Internet Help Desk on (08) 8423 4000 or email firstname.lastname@example.org with as much detail as possible regarding the issue at hand.